Brush machine, CNC brush tufting machine, CNC brush making machines, factory, exporter
Products Showroom
As a professional factory for brush machines in South China, Wangxinda is located in Baiyun District of Guangzhou, offering a wide range of CNC machines for making various brushes, such as plastic/wood brooms, toilet brushes, disk brushes, roller brushes and other industrial brushes, etc. Eager to find out more details about brush machinery? Start your inquiry now! It'll be our great pleasure to recommend suitable solutions to you!
WXD-1A2H01 is used to make strip brushes, it drills holes and tufts filaments simultaneously. With servo motors, the maximum speed is 6 holes per second. However, for daily use, it's suggested to keep the speed at about 4 holes per second, so as not to sh
It's used to make those big and long roller brushes with wood or plastic bases. With servo motors, the maximum speed is 5 holes per second, however, for daily use, it's suggested that operator keep the speed at about 3 holes per second, so as not to short
It's used to tuft entrance mats. It can also tuft other brushes with flat surfaces, as long as operator changes grippers. Please note the plastic brush bases must be moulded with holes in advance. It's used only for tufting (filling holes with bristles),
WXD-4A-003 is a 4-axis broom tufting machine of latest style, staple-type(using round wires). While tufting brooms, the maximum speed could be 5 holes per second, and it tufts filaments at angles. The maximum length of folded filaments is 12cm. Click to f
WXD-5A2H03 is used to make round toilet brushes with bristles in two colors. It can also make hockey-type toilet brushes, as long as operator changes grippers. The power supply could be either 3-phase 380V or 1-phase 220V, it's optional.
With a drilling head and a tufting head, WXD-5A2H02 is used to make hockey-type toilet brushes with bristles in two colors. With servo motors, the maximum speed is 5 holes per second. It could also make round toilet brushes, as long as operator changes gr
With extra-large size, with two tufting heads, WXD-4A2H02 is used to tuft big plastic brooms with long bristles. The maximum length of folded bristles allowed is 260mm, and its maximum speed is two holes per second. Other size could be customized.
WXD-3A-002 is used to tuft disc brushes, of which the plastic bases should be pre-molded with holes. Its power supply could be either 1-phase 220V or 3-phase 380V, which is optional. Its maximum tufting speed is 5 holes per second.
WXD-TM500 is used to trim brushes with abrasive filaments, which works automatically and is able to work 24 hours a day. As for the power supply, it could be either 1-phase 220V or 3-phase 380V, which is optional.
To trim a cylindrical brush to be corrugated, automatic brush trimmer WXD-TM400 is the best choice. Its power supply could be either single-phase 220V or 3-phase 380V, it's optional.
It's a CNC 2-axis tufting machine with new Cam system, used to make scrubbing brushes and other small industrial brushes with flat surface. The tufting mode could be either staple-type(using round wire) or anchor-type(using flat wire), it's optional.
WXD-4A3H02 is a staple-type broom machine with two drilling heads and a tufting head, with automatic lubrication system and vacuum system, which makes plastic brooms with holes inclining at angles.
This WXD-5A-002 is used to make both hockey-type toilet brushes and ball-type toilet brushes with filaments in two colors. Pls note that the plastic brush bases should be pre-drilled, already with holes.
With a drilling head and a tufting head, this machine is suitable for making brushes with curved surface, including toilet brushes, plastic scrubbing brushes and some other industrial brushes.
WXD-3A-L002 is used to make big roller brushes, which has functions of both drilling and tufting, but is much shorter than WXD-3A-L001. Click to see further details about it.
WXD-TM200 is used to trim wooden brushes with stainless steel wires or copper wires, so as to keep the wire-end flat. Before starting the brush trimmer, please check whether all working parts and guide rails are installed correctly and firmly.
It is a CNC 4-axis toilet brush tufting machine, also is suitable for tufting other fan-shaped brooms, scrubbing brushes and some industrial brushes with cambered surface, as long as operator changes clamps(grippers).
WXD-TM300 is used to trim ball-type toilet brushes, so as to keep the bristle-end flat. It trims toilet brushes with filaments made of plastic, PP, PVC, PET, bristle, etc, the diameter of filaments should be not more than 1.2mm
With two drilling heads, this machine is used to drill holes for various kinds of brushes with curved or flat surface, including plastic/wooden hairbrushes, toilet brushes and some other industrial brushes.
For this cylinder brush machine, the working voltage should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics.
no data
ADDRESS
No.6, Baihualing Industrial Park, Jia He Wang Gang, Baiyun District, Guangzhou, Guangdong, China.
LINKS
Home
About us
Products Showroom
Video
Information Center
About us
Products Showroom
Video
Information Center
PRODUCT
2-Axis CNC Brush
3-Axis CNC Brush Machines
4-Axis CNC Brush Machines
5-Axis CNC Brush Machines
Other Machines
CONTACT US
Contact Us 5-Axis CNC Brush Tufting Machine | 4-Axis CNC Brush Planting Machine | 3-Axis CNC Brush Filling Machine
